Minwax? Professional Formula Sanding Sealer is a clear sealer formulated for application over bare wood. Its quick dry feature allows for sealing and topcoating your project in just one day.
- Seals wood grain.
- Easy to sand.
- Dries in one hour.
- Use on unstained, bare wood floors, furniture, doors and cabinets.
- Can be topcoated with any Minwax? oil or water-based polyurethane finish.
|Application Tool:||synthetic bristle brush, foam applicator, or synthetic pad applicator|
|Location:||interior wood surfaces|
|Dry Time:||1 hour|
|Cleanup:||soap and water|
|Coverage:||125 sq. ft. per quart|
|Recommended Uses:||Use over bare wood floors, furniture, doors and cabinets before topcoating with any Minwax? oil or water-based polyurethane|
Directions Instrucciones en Español
Note: If wood is stained, it is not necessary to apply Minwax? Sanding Sealer prior to topcoating.
Directions for Use:
For Interior Use Only
Warning! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
- Sand project down to bare wood.
- Remove all dust, then thoroughly wipe with a damp cloth.
- Stir Minwax? Sanding Sealer well before and occasionally during use.
- Apply a thin coat of Minwax? Sanding Sealer with a high quality synthetic bristle brush, foam applicator, or synthetic pad applicator.
- Allow surface to dry at least one hour.
- Abrade surface with a new 320 grit sandpaper or screen, or a maroon floor pad. Remove all dust.
- Apply two or three coats of any Minwax? oil or water-based polyurethane, following label directions. Do not use under lacquer.
Note: Drying time will be increased by high humidity, low temperature, lack of air movement or heavier application.
CLEANUP: Clean application tools with warm water immediately after use.
COVERAGE: Approximately 500 square feet per gallon.
CAUTIONS: Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area.
Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage.
FIRST AID: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
WARNING: This product contains chemicals known to the State of California to cause cancer.
DO NOT TAKE INTERNALLY.
KEEP OUT OF THE REACH OF CHILDREN.
Frequently Asked Questions
What is Minwax? Sanding Sealer?
Minwax? Sanding Sealer is formulated to work as a base coat under any Minwax? oil or water-based polyurethane finish. It seals the wood grain, and is designed to be easy to sand, providing an ultra-smooth finish. It is formulated for use on unstained, interior, bare wood surfaces including floors, furniture, doors and cabinets.
How long does it take for Minwax? Sanding Sealer to dry?
It takes Minwax? Sanding Sealer only one hour to dry! The quick dry feature of Minwax? Sanding Sealer allows you to seal and topcoat your project in one day.
Which Minwax? products can be used with Minwax? Sanding Sealer?
Minwax? Sanding Sealer can be used with any Minwax? oil or water-based polyurethane finish, such as Minwax? Fast-Drying Polyurethane, Minwax? Super Fast-Drying Polyurethane for Floors, or Minwax? Water Based Oil-Modified Polyurethane.
Can Minwax? Sanding Sealer be used over stained wood?
This is not recommended. The purpose of Sanding Sealer is to seal the wood and form a base coat for a protective clear finish. If the wood has been stained, Sanding Sealer is not necessary. In addition, it's possible to scuff the stain while sanding the sealer. Sanding Sealer is best used on bare wood.
Can stain be applied over Minwax? Sanding Sealer?
No. Sanding Sealer completely seals the wood. It will prevent the wood from absorbing stain.
We Also Suggest
Here are some additional products and tips to explore.
Plan Your Exit
When finishing a floor, start in a back corner of the room. Be careful to plan your exit so you don't coat yourself into a corner!